What's the difference between $\mathbb{R}^2$ and the complex plane?

Question

I haven't taken any complex analysis course yet, but now I have this question that relates to it.

Let's have a look at a very simple example. Suppose $x,y$ and $z$ are the Cartesian coordinates and we have a function $z=f(x,y)=\cos(x)+\sin(y)$. However, now I change the $\mathbb{R}^2$ plane $x,y$ to complex plane and make a new function, $z=\cos(t)+i\sin(t)$.

So, can anyone tell me some famous and fundamental differences between complex plane and $\mathbb{R}^2$ by this example, like some features $\mathbb{R}^2 $ has but complex plane doesn't or the other way around. (Actually I am trying to understand why electrical engineers always want to put signal into the complex numbers rather than $\mathbb{R}^2$, if a signal is affected by 2 components)

Thanks for help me out!

Answer 1

The difference is that in the complex plane, you've got a multiplication $\mathbb C\times\mathbb C\to\mathbb C$ defined, which makes $\mathbb C$ into a field (which basically means that all the usual rules of arithmetics hold.)

Answer 2

If $X = \mathbb C$ (a one-dimensional vector space over the scalar field $\mathbb C$), [its] balanced sets are $\mathbb C$, the empty set $\emptyset$, and every circular disc (open or closed) centered at $0$. If $X = \mathbb R^2$ (a two-dimensional vector space over the scalar field $\mathbb R$), there are many more balanced sets; any line segment with midpoint at $(0,0)$ will do. The point is that, in spite of the well-known and obvious identification of $\mathbb C$ with $\mathbb R^2$, these two are entirely different as far as their vector space structure is concerned.

-W. Rudin (1973)

Answer 3

The big difference between $\mathbb{R}^2$ and $\mathbb{C}$: differentiability.

In general, a function from $\mathbb{R}^n$ to itself is differentiable if there is a linear transformation $J$ such that the limit exists:

$$\lim_{h \to 0} \frac{\mathbf{f}(\mathbf{x}+\mathbf{h})-\mathbf{f}(\mathbf{x})-\mathbf{J}\mathbf{h}}{\|\mathbf{h}\|} = 0$$

where $\mathbf{f}, \mathbf{x}, $ and $\mathbf{h}$ are vector quantities.

In $\mathbb{C}$, we have a stronger notion of differentiability given by the Cauchy-Riemann equations:

$$\begin{align*} f(x+iy) &\stackrel{\textrm{def}}{=} u(x,y)+iv(x,y) \\ u_x &= v_y, \\ u_y &= -v_x. \end{align*} $$

These equations, if satisfied, do certainly give rise to such an invertible linear transformation as required; however, the definition of complex multiplication and division requires that these equations hold in order for the limit

$$\lim_{h\ \to\ 0} \frac{f(z+h)-f(z)-Jh}{h} = 0$$

to exist. Note the difference here: we divide by $h$, not by its modulus.

---

In essence, multiplication between elements of $\mathbb{R}^2$ is not generally defined (although we could, if we wanted to), nor is division (which we could also attempt to do, given how we define multiplication). Not having these things means that differentiability in $\mathbb{R}^2$ is a little more "topological" -- we're not overly concerned with where $\mathbf{h}$ is, just that it gets small, and that a non-singular linear transformation exists at the point of differentiation. This all stems from the generalization of the inverse function theorem, which can basically be approached completely topologically.

In $\mathbb{C}$, since we can divide by $h$, because we have a rigorous notion of multiplication and division, we want to ensure that the derivative exists independent of the path $h$ takes. If there is some trickeration due to the path $h$ is taking, we can't wash it away with topology quite so easily.

In $\mathbb{R}^2$, the question of path independence is less obvious, and less severe. Such functions are analytic, and in the reals we can have differentiable functions that are not analytic. In $\mathbb{C}$, differentiability implies analyticity.

---

Example:

Consider $f(x+iy) = x^2-y^2+2ixy$. We have $u(x,y) = x^2-y^2$, and $v(x,y) = 2xy$. It is trivial to show that $$u_x = 2x = v_y, \\ u_y = -2y = -v_x,$$ so this function is analytic. If we take this over the reals, we have $f_1 = x^2-y^2$ and $f_2 = 2xy$, then $$J = \begin{pmatrix} 2x & -2y \\ 2y & 2x \end{pmatrix}.$$ Taking the determinant, we find $\det J = 4x^2+4y^2$, which is non-zero except at the origin.

By contrast, consider $f(x+iy) = x^2+y^2-2ixy$. Then,

$$u_x = 2x \neq -2x = v_y, \\ u_y = -2y \neq 2y = -v_x,$$

so the function is not differentiable.

However, $$J = \begin{pmatrix} 2x & 2y \\ -2y & -2x \end{pmatrix}$$ which is not everywhere singular, so we can certainly obtain a real-valued derivative of the function in $\mathbb{R}^2$.

Answer 4

$\mathbb{R}^2$ and $\mathbb{C}$ have the same cardinality, so there are (lots of) bijective maps from one to the other. In fact, there is one (or perhaps a few) that you might call "obvious" or "natural" bijections, e.g. $(a,b) \mapsto a+bi$. This is more than just a bijection:

• $\mathbb{R}^2$ and $\mathbb{C}$ are also metric spaces (under the 'obvious' metrics), and this bijection is an isometry, so these spaces "look the same".
• $\mathbb{R}^2$ and $\mathbb{C}$ are also groups under addition, and this bijection is a group homomorphism, so these spaces "have the same addition".
• $\mathbb{R}$ is a subfield of $\mathbb{C}$ in a natural way, so we can consider $\mathbb{C}$ as an $\mathbb{R}$-vector space, where it becomes isomorphic to $\mathbb{R}^2$ (this is more or less the same statement as above).

Here are some differences:

• Viewing $\mathbb{R}$ as a ring, $\mathbb{R}^2$ is actually a direct (Cartesian) product of $\mathbb{R}$ with itself. Direct products of rings in general come with a natural "product" multiplication, $(u,v)\cdot (x,y) = (ux, vy)$, and it is not usually the case that $(u,v)\cdot (x,y) = (ux-vy, uy+vx)$ makes sense or is interesting in general direct products of rings. The fact that it makes $\mathbb{R}^2$ look like $\mathbb{C}$ (in a way that preserves addition and the metric) is in some sense an accident. (Compare $\mathbb{Z}[\sqrt{3}]$ and $\mathbb{Z}^2$ in the same way.)
• Differentiable functions $\mathbb{C}\to \mathbb{C}$ are not the same as differentiable functions $\mathbb{R}^2\to\mathbb{R}^2$. (The meaning of "differentiable" changes in a meaningful way with the base field. See complex analysis.) The same is true of linear functions. (The map $(a,b)\mapsto (a,-b)$, or $z\mapsto \overline{z}$, is $\mathbb{R}$-linear but not $\mathbb{C}$-linear.)

Answer 5

The relationship between $\mathbb C$ and $\mathbb R^2$ becomes clearer using Clifford algebra.

Clifford algebra admits a "geometric product" of vectors (and more than just two vectors). The so-called complex plane can instead be seen as the algebra of geometric products of two vectors.

These objects--geometric products of two vectors--have special geometric significance, both in 2d and beyond. Each product of two vectors describes a pair of reflections, which in turn describes a rotation, specifying not only the unique plane of rotation but also the angle of rotation. This is at the heart of why complex numbers are so useful for rotations; the generalization of this property to 3d generates quaternions. For this reason, these objects are sometimes called spinors.

On the 2d plane, for every vector $a$, there is an associated spinor $a e_1$, formed using the geometric product. It is this explicit correspondence that is used to convert vector algebra and calculus on the 2d plane to the algebra and calculus of spinors--of "complex numbers"--instead. Hence, much of the calculus that one associates with complex numbers is instead intrinsic to the structure of the 2d plane.

For example, the residue theorem tells us about meromorphic functions' integrals; there is an equivalent vector analysis that tells us about integrals of vector functions whose divergences are delta functions. This involves using Stokes' theorem. There is a very tight relationship between holomorphic functions and vector fields with vanishing divergence and curl.

For this reason, I regard much of the impulse to complexify problem on real vector spaces to be inherently misguided. Often, but not always, there is simply no reason to do so. Many results of "complex analysis" have real equivalents, and glossing over them deprives students of powerful theorems that would be useful outside of 2d.

Answer 6

Since everyone is defining the space, I figured I could give an example of why we use it (relating to your "Electrical Engineering" reference). The $i$ itself is what makes using complex numbers/variables ideal for numerous applications. For one, note that:

\begin{align*} i^1 &= \sqrt{-1}\\ i^2 &= -1\\ i^3 &= -i\\ i^4 &= 1. \end{align*} In the complex (real-imaginary) plane, this corresponds to a rotation, which is easier to visualize and manipulate mathematically. These four powers "repeat" themselves, so for geometrical applications (versus real number manipulation), the math is more explicit.

One of the immediate applications in Electrical Engineering relates to Signal Analysis and Processing. For example, Euler's formula: $$ re^{i\theta}=r\cos\theta +ir\sin\theta $$ relates complex exponentials to trigonometric formulas. Many times, in audio applications, a signal needs to be decomposed into a series of sinusoidal functions because you need to know their individual amplitudes ($r$) and phase angles ($\theta$), maybe for filtering a specific frequency:

This means the signal is being moved from the time-domain, where (time,amplitude) = $(t,y)$, to the frequency domain, where (sinusoid magnitude,phase) = $(r,\theta)$. The Fourier Transform (denoted "FT" in the picture) does this, and uses Euler's Formula to express the original signal as a sum of sinusoids of varying magnitude and phase angle. To do further signal analysis in the $\mathbb{R}^2$ domain isn't nearly as "clean" computationally.

Answer 7

I'll explain this more from an electrical engineer's perspective (which I am) than a mathematician's perspective (which I'm not).

The complex plane has several useful properties which arise due to Euler's identity:

$$Ae^{i\theta}=A(\cos(\theta)+i\sin(\theta))$$

Unlike points in the real plane $\mathbb{R}^2$, complex numbers can be added, subtracted, multiplied, and divided. Multiplication and division have a useful meaning that comes about due to Euler's identity:

$$Ae^{i\theta_1}\cdot{Be^{i\theta_2}}=ABe^{i(\theta_1+\theta_2)}$$

$$Ae^{i\theta_1}/{Be^{i\theta_2}}=\frac{A}{B}e^{i(\theta_1-\theta_2)}$$

In other words, multiplying two numbers in the complex plane does two things: multiplies their absolute values, and adds together the angle that they make with the real number line. This makes calculating with phasors a simple matter of arithmetic.

As others have stated,addition, subtraction, multiplication, and division can simply be defined likewise on $\mathbb{R}^2$, but it makes more sense to use the complex plane, because this is a property that comes about naturally due to the definition of imaginary numbers: $i^2=-1$.

Answer 8

There are plenty of differences between $\mathbb{R}^2$ plane and $\mathbb{C}$ plane. Here I give you two interesting differences.

First, about branch points and branch lines. Suppose that we are given the function $w=z^{1/2}$. Suppose further that we allow $z$ to make a complete circuit around the origin counter-clockwisely starting from a point $A$ different from the origin. If $z=re^{i\theta}$, then $w=\sqrt re^{i\theta/2}$.

At point $A$, $\theta =\theta_1$, so $w=\sqrt re^{i\theta_1/2}$.

While after completing the circuit, back to point $A$,
$\theta =\theta_1+2\pi$, so $w=\sqrt re^{i(\theta_1+2\pi)/2}=-\sqrt re^{i\theta_1/2}$.

Problem is, if we consider $w$ as a function, we cannot get the same value at the same point. To improve, we introduce Riemann Surfaces.Imagine the whole $\mathbb{C}$ plane as two sheets superimposed on each other. On the sheets, there is a line which indicate real axis. Cut two sheet simultaneously along the POSITIVE real axis. Imagine the lower edge of the bottom sheet is joined to the upper edge of the top sheet.

We call the origin as a branch point and the positive real axis as the branch line in this case.

Now, the surface is complete, when travelling the circuit, you start at the top sheet and if you go one complete circuit, you go to the bottom sheet. Travelling again, you go back to the top sheet. So that $\theta_1$ and $\theta_1+2\pi$ become two different point (at the top and the bottom sheet respectively), and comes out two different value.

Another thing is, in $\mathbb{R}^2$ case, $f'(x)$ exist not implies $f''(x)$ exist. Try thinking that $f(x)=x^2$ if $x\ge0$ and $f(x)=-x^2$ when $x<0$. But in $\mathbb{C}$ plane. If $f'(z)$ exist (we say $f$ is analytic), it guarantees $f'(x)$ and thus $f^{(n)}(x)$ exist. It comes from the Cauchy's integral formula.

I am not going to give you the proof, but if you are interested, you should know Cauchy Riemann Equations first: $w=f(z)=f(x+yi)=u(x,y)+iv(x,y)$ is analytic iff it satisfy $\frac{\partial u}{\partial x}=\frac{\partial v}{\partial y}$, $\frac{\partial u}{\partial y}=-\frac{\partial v}{\partial x}$ both. Proof is simply comes from the definition of differentiation. Thus, once you get $u(x,y)$ you can find $v(x,y)$ from the above equation, making $f(z)$ analytic,

Answer 9

My thought is this: $\mathbb{C}$ is not $\mathbb{R}^2$. However, $\mathbb{R}^2$ paired with the operation $(a,b) \star (c,d) = (ac-bd, ac+bd)$ provides a model of the complex numbers. However, there are others. For example, a colleague of mine insists that complex numbers are $2 \times 2$ matrices of the form: $$ \left[ \begin{array}{cc} a & -b \\ b & a \end{array} \right] $$ but another insists, no, complex numbers have the form $$ \left[ \begin{array}{cc} a & b \\ -b & a \end{array} \right] $$ but they both agree that complex multiplication and addition are mere matrix multiplication rules for a specific type of matrix. Another friend says, no that's nonsense, you can't teach matrices to undergraduates, they'll never understand it. Maybe they'll calculate it, but they won't really understand. Students get algebra. We should model the complex numbers as the quotient by the ideal generated by $x^2+1$ in the polynomial ring $\mathbb{R}[x]$ in fact, $$ \mathbb{C} = \mathbb{R}[x]/\langle x^2+1\rangle$$ So, why is it that $\mathbb{C} = \mathbb{R}^2$ paired with the operation $\star$? It's because it is easily implemented by the rule $i^2=-1$ and proceed normally. In other words, if you know how to do real algebra then the rule $i^2=-1$ paired with those real algebra rules gets you fairly far, at least until you face the dangers of exponents. For example, $$ -1 = \sqrt{-1} \sqrt{-1} = \sqrt{(-1)(-1)} = \sqrt{1} = 1 $$ oops. Of course, this is easily remedied either by choosing a branch of the square root or working with sets of values as opposed to single-valued functions.

All of this said, I like Rudin's answer for your question.

Answer 10

To augment Kendra Lynne's answer, what does it mean to say that signal analysis in $\mathbb{R}^2$ isn't as 'clean' as in $\mathbb{C}$?

Fourier series are the decomposition of periodic functions into an infinite sum of 'modes' or single-frequency signals. If a function defined on $\mathbb{R}$ is periodic, say (to make the trigonometry easier) that the period is $2\pi$, we might as well just consider the piece whose domain ins $(-\pi, \pi]$.

If the function is real-valued, we can decompose it in two ways: as a sum of sines and cosines (and a constant): $$ f(x) = \frac{a_0}{2} + \sum_{n=1}^{\infty} a_n \cos(nx) + \sum_{n=1}^{\infty} b_n \sin(nx)$$ There is a formula for the $a_k$ and the $b_k$. There is an asymmetry in that $k$ starts at $0$ for $a_k$ and at $1$ for $b_k$. There is a formula in terms of $\int_{-\pi}^{\pi} f(x) \cos(kx)dx$ for the $a_k$ and a similar formula for the $b_k$. We can write a formula for $a_0$ which has the same integral but with $\cos(0x) = 0$, but unfortunately we have to divide by 2 to make it consistent with the other formulae. $b_0$ would always be $0$ if it existed, and doesn't tell us anything about the function.

Although we wanted to decompose our function into modes, we actually have two terms for each frequency (except the constant frequency). If we wanted to say, differentiate the series term-by-term, we would have to use different rules to differentiate each term, depending on whether it's a sine or a cosine term, and the derivative of each term would be a different type of term, since sine goes to cosine and vice versa.

We can also express the Fourier series as a single series of shifted cosine waves, by transforming $$ a_k \cos(kx) + b_k \sin(kx) = r_k \cos(kx + \theta_k) .$$ However we now lost the fact of expressing all functions as a sum of the same components. If we want to add two functions expressed like this, we have to separate the $r$ and $\theta$ back into $a$ and $b$, add, and transform back. We also still have a slight asymmetry - $r_k$ has a meaning but $theta_0$ is always $0$.

The same Fourier series using complex numbers is the following: $$ \sum_{n=-\infty}^{\infty} a_n e^{inx} .$$ This expresses a function $(-\pi, \pi] \rightarrow \mathbb{C}$. We can add two functions by adding their coefficients, we can even work out the energy of a signal as a simple calculation (each component $e^{ikx}$ has the same energy. Differentiating or integrating term-by-term is easy, since we are within a constant of differentiating $e^x$. A real-valued function has $a_n = a_{-n}$ for all $n$ (which is easy to check). $a_n$ all being real, $a_{2n}$ being zero for all $n$ or $a_{n}$ being zero for all $n < 0$ all express important and simple classes of periodic functions.

We can also define $z = e^{ix}$ and now the Fourier series is actually a Laurent series: $$ \sum_{n=-\infty}^{\infty} a_n z^{n} .$$

The Fourier series with $a_n = 0$ for all $n < 0$ is a Taylor series, and the one with $a_n$ all real is a Laurent series for a function $\mathbb{R} \rightarrow \mathbb{R}$. We are drawing a deep connection between the behavior of a complex function on the unit circle and its behavior on the real line - either of these is enough to specify the function uniquely, given a couple of quite general conditions.

Answer 11

One might consider $\mathbb C$ and $\mathbb R^2$ to be isomorphic in some sense, since $f(a+bi)=(a,b)$ defines a bijection. If we define addition in $\mathbb R^2$ coordinate-wise, then this (group-)isomorphism holds as $$f((a+bi)+(c+di))=(a,b)+(c,d)=(a+c,b+d)=f((a+c)+(b+d)i)$$

One way you might define multiplication in $\mathbb R^2$ is also coordinate-wise. But the above bijection would not form a (ring-)isomorphism in that case, since $f(1)=(1,1)$, $f(i)=(a,b)$, and $$f(i^2)=f(-1)=(-1,-1)=f(ii)=f(i)f(i)=(a^2,b^2)$$ demonstrates a contradiction $a^2=-1$ for real-valued $a$.

However, as is stated elsewhere, defining multiplication by $(a,b)(c,d)=(ac-bd)+(bc+ad)i$ does in fact allow $f$ to be a ring isomorphism.

(N.B. if you have a bijection, you can always coerce it to be a ring isomorphism... provided you're flexible in how you define addition and multiplication for one of the sets in question!)

Answer 12

Electrical engineers are much entangled in the complex numbers field just because a fundamental circuit block, like it is a RC, "works perfectly" with the complex numbers: its impedance looks to be "naturally" complex.
And then linear analogic circuits naturally lead to Fourier and Laplace and Transfer function, Bode diagrams and so on.